Skip to content
Get Started

Should Ethernet cable be installed in conduit or run directly?

Use conduit where cable needs physical protection, a serviceable pathway or future replacement—especially underground and in many exterior routes. Direct runs are practical inside accessible walls, attics, basements and crawlspaces when the cable is listed for the space, supported correctly and protected from damage. Direct burial requires cable specifically designed for that use.

Published: November 16, 2026Updated: November 16, 20262 min read

Where conduit earns its keep

Conduit is valuable under soil or concrete, through exposed exterior areas, across detached-building routes and anywhere a future cable pull is likely. It can protect against abrasion and make an upgrade possible without reopening the entire path.

Plan bend radius, pull points, conduit fill, drainage or water entry details, bushings and weather sealing. Leave a pull cord where future work is likely, and do not jam a large bundle into a conduit simply because it can be forced through.

Where a direct run is reasonable

Inside concealed framing or an accessible attic or crawlspace, a direct run can be simpler and easier to service. Support it with suitable low-voltage hardware rather than pinching it with staples, and protect it at sharp edges and penetration points.

The cable still needs the right fire and environmental listing. Direct does not mean unplanned: avoid hazardous routes, maintain required separation and fire-stop rated assemblies.

Direct burial is a cable type, not just a method

Do not bury ordinary indoor Cat6 in soil, even if it seems durable. Use a product explicitly listed for direct burial and follow its installation requirements, or place suitable outdoor cable in conduit.

Conduit can fill with water, so outdoor-rated cable is often still appropriate inside buried conduit. The complete design must account for moisture, sunlight, temperature and entry into the building.

Copper or fiber between buildings

The 100-metre channel limit includes the actual copper route, not just the distance across the yard. Fiber avoids a conductive path between structures and is often the better backbone choice, particularly for longer routes or separate electrical services.

Outdoor copper links also need appropriate surge and code consideration. A site-specific design is more important than choosing conduit alone.

The practical recommendation

Install spare conduit during construction or trenching, when the incremental work is small. For an accessible indoor retrofit, use direct runs with proper cable and supports; for exposed, buried or future-proof pathways, price conduit before deciding.

Sources and further reading

Best for

Choosing pathways for attics, exterior routes, trenches and detached buildings.

Things to consider

  • Conduit adds protection and future access
  • Direct burial needs suitable cable
  • Buried conduit can still admit water

Common mistakes

  • Burying indoor cable
  • Overfilling conduit or ignoring bend radius

What we recommend

Use properly supported direct runs indoors and conduit for exposed, buried or future-upgrade pathways; use outdoor-rated cable where conditions require it.

Planning Ethernet for your home?

Submitting costs nothing. Your contact details stay private until a matched professional takes your project.

Start Your Project